Centrifugal Pumps
Centrifugal Water Pumps
Capacity: up to 550M3/Hr.
Speed: up to 3600 Rpm
Head: up to 100 Mtrs.
Sizes from DN 32 to 200mm MOC: Cast Iron and Bronze.
This Pump is specially made for /used in Industrial Water Application, Firefighting Application, Air conditioning Plants etc.
KIMCOWLL is handling all types clear water, Non aggressive liquids, Etc.
Horizontal back Pull out with closed impeller construction, designed in DIN24255/EN733.
Heavy Centrifugal Pumps – DIN 24256
Capacity: up to 1400M3/Hr.
Speed: up to 2900 Rpm
Head: up to 80 Mtrs.
Sizes from DN 65 to 300mm MOC: Cast Iron/WCB/CF8/CF8M/CD4MCu/Alloy20 (SS304/316)
These pumps are used in Sea Water Desalination Plants, Paper & Pulp Industries, Sugar, Food Industries & Effluent Industries Etc.
KIMCOWLL is handling of all type of Pulp & Paper stock, (Up to 5% Consistency) Heavily Contaminated Liquids Etc...
Horizontal Back pull out easy design with closed and Open Impeller as per DIN 24256.
Centrifugal Vertical Multistage Pumps
Capacity: up to 1400M3/Hr.
Speed: up to 2900 Rpm
Head: up to 100 Mtrs.
Sizes from DN 25 to300mm MOC: Cast Iron/WCB/CF8/CF8M/CD4MCu/Alloy20Etc… (SS304/316)
These pumps are used in Chemical & Petro Chemical Industries, Sugar, Food Industries & Fertilizers unit, Etc.…
KIMCOWLL is handling all type of Liquids, Acids, Alkalis, Corrosive slurries, Waste Water Etc.…
Vertical Suspended Design with closed and Open Impeller. Economy Spacing
Single Stage Centrifugal Monoblock pumps
These pumps are non-self-priming, horizontal, single-stage, centrifugal volute casing pumps with axial suction and radial discharge port.
Performance of the pumps comply to ISO 2858.
Standard flanges for suction and discharge ends are ANSI 125 and ANSI 250 as per ASME B16.1. DIN EN 1092-2 with PN 16 ratings and DIN EN 1092-2 with PN 25 ratings can also be offered on request.
Pumps has the discharge range from 35 - 2790 GPM and the head range from 15 - 470 feet.
The motor ratings are from 1 to 200 HP.
Pumps are enbloc with TEFC squirrel cage induction motor
Pumps with mechanical shaft seal is a standard supply.
Pump impellers are dynamically balanced P
umps has the back pull-out design. This feature helps the user; to remove the motor, bearing bracket & impeller for servicing without disturbing the volute casing and the suction & delivery pipes
We can also supply pumps with IEC standard motors with aluminum frame size from 71 to 160 and motor with cast iron frame size from 180 to 315.
Flow range: up to 2790 gpm
Head range: up to 470 feet
Rating :0.37 - 150 kW
Rated speed :1150/1750/3450 rpm
End Suction Pumps
These low head high-capacity pumps can be either gland packed or mechanically sealed. Pumps are offered with vertical or horizontal delivery nozzle options and in various combinations of material to suit application requirements. Pumps are offered with Non-Clog, Semi-Open or Enclosed Type Impellers. These are majorly used in air conditioning, irrigation, drainage and storm water. Delivery size can vary from 200 mm to 650 mm.
Capacity: up to 3400M3/Hr.
Speed: up to 1450 Rpm
Head: up to 40 Mtrs.
Sizes from DN 200 to650mm MOC: Cast Iron/Bronze/CF8/CF8M
(SS304/316) S304/316)
